Cable Assembly - Datacolor CHECK II Quick Start Manual

Power Adapter. This component includes a coaxial connector, and a
power adapter with power cord receptacle.
Coaxial
connector
Power Adapter Cord. Includes plugs to power outlet and to power
adapter.
CAUTION
The power cord supplied with the unit must be used.

Cable Assembly

WARNING
Disconnect the power adapter from the wall outlet before connecting
Datacolor CHECK II to the adapter or PC.
1.
2.
3.
When assembled correctly, your cable should look like the diagram
below:
CHECK II Quick Start Guide
Power adapter plug
Plug the coaxial connector from the Datacolor CHECK II
connector (1) into the coaxial connector from the power
adapter (1).
Insert the adapter power cord into the adapter (2).
Plug the radial connector (3) into the port on the back of
the Datacolor CHECK II.
3
Power outlet
1
Power cord
receptacle
2
Instrument Cable  9