Instrument Cable; Cable Components - Datacolor CHECK II Quick Start Manual

Instrument Cable

A custom cable is included with the instrument. This cable comes as 3
separate components that you must assemble.
It is used for two functions:

To connect the Datacolor CHECK II ™to its power adapter.

To connect Datacolor CHECK II to a port on a PC.

Cable Components

When assembled, the Datacolor CHECK II cable has 3 connectors on it.
One connects to the instrument, one connects to a port on the
computer, and one connects to the power adapter.
Connector to
port on
computer
NOTE
Two communications cables are supplied with the instrument.
One is used to connect the unit to a serial port, and the other is used to
connect to a USB port. You will only use one of these cables, based
on the type of communications port available on your computer.
Communications Cable
NOTE
If you will not be using the Datacolor CHECK II with other Datacolor
software programs, you can use either communications cable.
8  Instrument Cable
Serial
coaxial cable
(to power adapter)
Communications Cable
CHECK II Quick Start Guide
8-pin radial
connector (to
back of
instrument)
USB