40X ZOOM IR PTZ DOME CAMERA USER GUIDE
Configuring DDNS
You can configure Dynamic DNS (DDNS) settings on the Setting > Network > DDNS
page.
You can use a DDNS service to track and update your camera's dynamic IP address,
so that even when the numeric IP address changes the DDNS address always remains
the same.
To access your camera using a DDNS service:
1.
Register an account with a supported DDNS service, such as DynDNS or
Honeywell's free DDNS service (www.hennvr-ddns.com).
2.
Select the Type check box, then select your DDNS service from the drop-down
list (for example, Honeywell DDNS).
3.
In the Domain Name field, enter the domain name (hostname) that you
registered with the DDNS service (for example, mycamera.dyndns.org).
4.
In the User Name and Password fields, enter the user name and password
of the account that you registered in step 1.
In the Update Period field, enter the interval in minutes between address updates sent
5.
to the DDNS server.
If you selected Honeywell DDNS as your DDNS service, the domain name is set to
the camera's MAC address by default and no user name or password are required.
Note
Set Mode to Default or Customized. If you enter the domain name manually, click
Test to verify that the domain name is registered.
Click Save to apply the settings. You can now access the camera by entering the
6.
domain name in your browser's address bar.
Configuring SMTP(Email)
You can configure email notification settings on the Setting
page.
44
Network
SMTP(Email)