40X ZOOM IR PTZ DOME CAMERA USER GUIDE
Deleting a Group
You can delete any custom group that you have created (you cannot delete the
administrator group or the user group).
To delete a group:
1.
On the Group tab, select the group that you want to delete (your selection will be
highlighted yellow), and then click the Delete icon
A confirmation message appears. Click OK to continue. The group is removed from
2.
the list.
Default
You can reset the camera to its factory default settings on the Setting System
Default page.
Note
To reset the camera:
1. Click Default.
2. A confirmation message appears. Click OK to continue. The camera reboots
automatically and reverts to its factory default settings.
To reset the camera to the factory default:
1. Click Factory Default.
2. A confirmation message appears.
3. Enter the password and the camera reboots automatically and reverts to its
factory default settings.
Import/Export
You can back up or restore configuration settings on the Setting System
90
Some configuration information, including the IP address, will be lost when the
camera reverts to its factory default settings.
.