Configuring Qos; Configuring Certificates - Honeywell HDZ402LIWV User Manual

To enable 802.1x:
1. Select the Enable check box.
2. In the User Name field, enter the user name that will be used to
authenticate the camera.
3. In the Password field, enter the password that will be used to authenticate the camera.
4. Click Save to apply the settings.

Configuring QoS

You can configure Quality of Service (QoS) settings on the Setting
page.
QoS settings control bandwidth use by prioritizing certain data packets over others.
To enable QoS:
1. In the Realtime Monitor field, enter a DSCP (Differentiated Services Codepoint)
value for live video packets. Select a value between 0 (lowest priority) and 63
(highest priority).
2. In the Command field, enter a DSCP (Differentiated Services Codepoint) value for
non- video packets. Select a value between 0 (lowest priority) and 63 (highest
priority).
3. Click Save to apply the settings.

Configuring Certificates

You can configure certificate settings on the Setting Network  Certificate page.
To install a Honeywell-signed root certificate:
1. Click Export, navigate to the directory where you want to save the certificate
(ca.crt) on your PC, and then click Save.
2. Go to the directory where you saved the certificate and double-click the certificate.
The Certificate window opens.
3. In the Certificate window, on the General tab, click Install Certificate to open the
Certificate Import Wizard.
40X ZOOM IR PTZ DOME CAMERA USER GUIDE
 Network  QoS
49