Configuring Overlay - Honeywell HDZ402LIWV User Manual

40X ZOOM IR PTZ DOME CAMERA USER GUIDE
Image Size
The image size is determined by the main stream resolution setting. It is not
configurable.
Quality
Set the Quality to a value between 1 (lowest) and 6 (highest).
Interval
Select a snapshot frequency between 1 snapshot per second (1s) and 7 snapshots
per second (7s), or click Customized to define a custom setting between 1 and 16
seconds.
Click Save to apply the settings.

Configuring Overlay

Privacy Masking
You can configure privacy mask properties on the Setting  Camera  Video  Overlay 
Privacy Mask page.
Select the number of the privacy mask that you want to configure from the Privacy Mask No.
list. By default, privacy masks are black. To change the color, click the desired Color swatch.
Position the camera using the controls below the preview window.
To draw a privacy mask, click Draw, and then, in the preview window, drag your mouse
over the portion of the scene that you want to conceal. You can add up to 24 privacy
masks.
To delete a privacy mask, click Delete. To delete all the privacy masks, click Clear.
To send the camera to a privacy mask, select the Privacy Mask No., and then click Go to.
Channel Title
You can configure the channel title properties on the Setting  Camera  Video  Overlay
 Channel Title page.
To display the channel title, click Enable, and then click Save. By default, the channel
title appears in the lower left corner of the video image.
To move the channel title, drag the yellow Channel Title box to the desired location in
the preview window, and then click Save.
To modify the channel title, enter the new title in the Input Channel Title field, and then click
Save.
34