Wiper Configuration - Honeywell HDZ402LIWV User Manual

40X ZOOM IR PTZ DOME CAMERA USER GUIDE
2. Navigate to the location of the firmware file (.bin), select it, and then click
Open. The file name appears in the Firmware File field.
3. Click Upgrade to install the firmware.
4. Reboot the camera.
Note

Wiper Configuration

You can do the wiper settings on the Setting  System  Peripheral page.
Note
92
If you attempt to install an older version of the firmware, a warning message will
appear.
HDZ402LIWV/HDZ404LIWV/HDZ408LIWV support Wiper function.