Table of Contents
Advertisement
By default, the pre-event record time (the number of seconds the system
stores in a buffer) is 5 seconds. To change this setting, enter a time between 0
and 5 seconds in the Pre-Event Record field.
From the Disk Full list, select Overwrite or Stop.
Overwrite: Recording continues when disk capacity is reached and
•
overwrites previously saved video.
Stop: Recording stops when disk capacity is reached. Nothing is
•
overwritten and no further video is recorded.
Set Record Mode to Auto, Manual, or Off.
Auto: Video records continuously.
•
Manual: Video recording must be initiated by user.
•
Off: Video recording is disabled.
•
From the Record Stream list, select the stream profile that you want to use
for recording video: Main Stream or Sub Stream.
Click Save to apply the settings.
40X ZOOM IR PTZ DOME CAMERA USER GUIDE
83
Advertisement
Table of Contents
