Configuring Multicast; Configuring 802.1X - Honeywell HDZ402LIWV User Manual

40X ZOOM IR PTZ DOME CAMERA USER GUIDE

Configuring Multicast

You can configure multicast settings on the Setting
Multicast is a transmission mode for data packets that minimizes bandwidth use and
CPU load when multiple computers are receiving the same data packet
simultaneously. You can configure multicast for Main Stream, Sub Stream 1, and Sub
Stream 2 profiles.
To enable multicast:
1. For each stream that you want to enable multicast in, select the Enable check box,
and then enter a multicast address and port, using the suggested ranges as a
guide.
2. Click Save to apply the settings.
To view video in multicast mode:
In Live view, select Multicast from the Protocol drop-down list.

Configuring 802.1x

You can configure 802.1x settings on the Setting
802.1x is a port-based network access control protocol for preventing unauthorized
devices from accessing the LAN. You can set up user name and password credentials
for the camera so that it is not blocked by the network switch.
48
 Network  Multicast page.
 Network  802.1x page.