Table of Contents
Advertisement
4. To start recording video when the event is detected, select the Record check box.
5. In the Record Delay field, enter the number of seconds that the system will
continue to record video after the event has ended. Enter a value between
10 and 300.
6. To generate an alarm output when the event is detected, select the Alarm Output
check box and select the alarm output(s) to be activated.
7. In the Alarm Delay field, enter the number of seconds that the system will
continue to generate an alarm output after the event has ended. Enter a
value between 10 and 300.
8. Click Save to apply the settings.
Configuring Illegal Access
An illegal access event occurs when a specified number of unsuccessful login
attempts is exceeded.
To enable illegal access detection:
1. On the Illegal Access tab, select the Enable check box.
2. In the Failed Login Attempts field, enter the number of unsuccessful login
attempts the system will allow before an illegal access event is detected.
Enter a value between 3 and 10.
3. To generate an alarm output when the event is detected, select the Alarm Output
check box and select the alarm output(s) to be activated.
4. In the Alarm Delay field, enter the number of seconds that the system will
continue to generate an alarm output after the event has ended. Enter a
value between 10 and 300.
5. To send an email notification when an illegal access event is detected,
select the Send Email check box. Email settings must be configured in
Setting Network SMTP (Email).
40X ZOOM IR PTZ DOME CAMERA USER GUIDE
77
Advertisement
Table of Contents
