62 | Performance Series IP Camera Software Configuration Guide
DDNS
Manually Configuring the DDNS
To set the DDNS, go to the corresponding service website to apply a domain name, and then
access the system through that domain. This works even if your IP address has changed.
Parameter
Server Type
Server Address
Domain Name
Username
Password
Update Period
www.honeywell.com/security
Figure 5-12
DDNS Configuration Interface
Table 5-9
DDNS Configurations
Function
You can select the DDNS protocol from the drop-down list, and then
enable the DDNS function. Select the Honeywell DDNS server (which is
free) to enable the DDNS function.
The DDNS server IP address.
Your self-defined domain name.
The user name you enter to log into the server.
The password you enter to log into the server.
The frequency at which the camera regularly sends out the life signal
(heartbeat) to the server. You can set the interval value between the
camera and the DDNS server here.