Appointing/Cancelling A Lecturer; Switching Roles Between Moderators And Guests; Applying For Speaking - Yealink VP59 User Manual

3.
Tap / bedside the desired participant.
You can also tap All Allow/All Reject to manage all the participants in the lobby.

Appointing/Cancelling a Lecturer

In a training mode conference, if you are the organizer or moderator, you can appoint anyone or yourself
as a lecturer.
About this task
Note: The modes of scheduled conferences and VMRs are Discussion mode and Training
mode. Only the enterprise administrator can configure the conference mode on YMS.
In the Discussion mode conference, all conference participants can speak freely.
•
In the Training mode conference, all conference participants are muted by default except for the
•
organizer or the moderator. The organizer or the moderator can appoint lecturers, and the lecturers can
speak freely.
Procedure
1. Tap > Participants.
If the video image is displayed in full-screen, you need to exit the full screen first.
2. On the Participants page, tap
3. To finish speaking, tap

Switching Roles between Moderators and Guests

The moderator can switch the visitor to the moderator. When a participant is not expected to continue to
act as a moderator, the moderator can switch the person to a visitor. Organizers cannot be switched to
visitors.
Procedure
1. Tap > Participants.
If the video image is displayed in full-screen, you need to exit the full screen first.
2. On the Participants page, tap
visitor.

Applying for Speaking

In Training mode conferences or VMRs, all guests are muted by default except for the moderator and the
organizer.
Procedure
Tap Hands up.
If you display the video image in the full screen, you need to tap
beside the desired participant, and select Set as lecturer.
, and select Cancel lecturer.
beside the desired participant, and select Set as moderator/Set as
| Using Yealink Meeting Server | 30
first, and tap Hands up.