Emerson Rosemount 3051CF Series Reference Manual page 52

Configuration
July 2020
Figure 2-22: Enable/Disable Alert Simulation Screen
A. Enable/Disable Alert suppression button
B. Check boxes to activate/deactivate simulation of specific alerts
The screen shown in
and allows individual alerts to be selected for simulation.
The sequence of steps to enable alert simulation is:
Procedure
1. A screen displays stating Alert Simulation is disabled.
2. The screen presents the question Do you want to enable alerts simulation? Below
3. A screen is displayed stating Alert Simulation is enabled.
4. The screen presents the question Do you want to disable alerts simulation? Below
2.9.8 Statistical Process Monitoring (SPM)
Note
Set up SPM in the SPM transducer block. For block oriented user interfaces, configure SPM
in the SPM transducer block.
Menu navigation: Configure>Guided Setup>Basic SPM Setup
SPM configuration provides the capability to configure SPM for use in plugged line
detection or other abnormal process conditions. See
more information on SPM functions and uses.
Note
SPM is a factory only option, option code D01, and can't be licensed/installed in the field.
52
Figure 2-22
this sentence are two radio buttons labeled Yes and No. Click Yes.
The sequence of steps to disable alert simulation is:
this sentence are two radio buttons labeled Yes and No. Click Yes.
above enables/disables overall alert simulation capability
Advanced pressure diagnostics
Reference Manual
00809-0100-4774
for
Rosemount 3051