Table of Contents
Advertisement
Routine Operation
Using KingFisher
Duo PC software
Using internal
software
Factory / User
protocols
Selecting the protocol
38
Thermo Scientific KingFisher Duo User Manual
The operation of the KingFisher Duo magnetic particle processor can
also be controlled by an external computer and run on BindIt Software.
In addition to the KingFisher Duo internal software features, you can
download protocols to the instrument or back up protocols from one
instrument and transfer them to another.
For more information, refer to the BindIt Software User Manual
(Cat. no. N07974).
This section describes procedures concerning the KingFisher Duo
internal software.
This section describes the factory/user set protocols. They are found in
the Protocols menu. Factory protocols are protocols which are created
by Thermo Fisher Scientific and preloaded into the instrument internal
memory in the factory (e.g. Thermo Scientific KingFisher Kit
protocols) or downloaded from the KingFisher website
(
www.thermoscientific.com/kingfisher
which are created by the user and transferred using BindIt Software.
Go to the Protocols menu. Select, for example, the DNA row of the
factory protocols and press
Use the Up and Down arrow keys to select the protocol.
Press
to see the protocol details.
OK
). User protocols are protocols
.
OK
Thermo Fisher Scientific
Advertisement
Table of Contents
