Figure 7-9 Face Detection; Table 7-6 Face Detection Configurations - Honeywell Performance Series User Manual

Figure 7-9 Face Detection

To enable face detection:
1. Select the Enable check box.
2. (Optional) Click Draw next to Detect Region to draw a face detection area in the image.
3. (Optional) Click Draw next to Exclude Region to draw a non-face detection area in the
Detect Region.
4. (Optional) Select Max Size or Min Size, click Draw Target at the right side of Target filter,
and then draw the target in the image.
5. Set parameters.

Table 7-6 Face Detection Configurations

Parameter Function
Select the OSD check box, and the number of people with face
OSD
detected and recognized is displayed on the Live interface.
Click Setup. On the Period window, set the days and times when you
Period
want the alarm function to be active, and then click Save.
Select the Face Enhancement check box to preferably guarantee clear
Face
Enhancement
face with low stream.
select the Snapshot check box to take a snapshot when an event is
Snapshot
detected.
Snap Face Set a range for snapping face image, including Face and One-inch
Image photo.
Instant Snap: Capture the picture when camera detects face.
Snap Mode
Optimized Snap: Capture the clearest picture within the configured
Configuring Video Analytics Settings
61