Snapshot; Video Overlay; Figure 5-6 Snapshot; Table 5-2 Snapshot Configurations - Honeywell Performance Series User Manual

Snapshot

Go to Setup  Camera Setup  Video Snapshot.

Figure 5-6 Snapshot

Table 5-2 Snapshot Configurations

Parameter
Snapshot Type
Image Size
Quality
Interval
See
Note
snapshots are saved. Snapshots are saved as JPEGs.

Video Overlay

Go to Setup  Camera Setup  Video Overlay.
Function
Select from either General (schedule) or Event (activation).
General: Snapshots are taken according to a user-defined
schedule.
Event: Snapshots are taken whenever an alarm, motion
detection, camera tampering, or system event occurs.
The image size is determined by the main stream resolution
setting. It is not configurable.
Set the Quality to a value between 1 (lowest) and 6
(highest).
Select a snapshot frequency between 1 snapshot per
second (1s) and 7 snapshots per second (7s), or click
Customized to define a custom setting between 1 and
50,000 seconds.
Path on page 33 for information about configuring where
Configuring Camera Settings
31