Record Control - Honeywell Performance HDZP252DI User Manual

Parameter
Remote Directory
Emergency (Local)
NAS
On the NAS tab, you can enable the NAS storage function. When enabled, event-triggered video
and snapshots (either scheduled or motion detection, depending on what you chose in
page
Parameter
Enable
Server Address
Remote Directory

Record Control

Table 5-22 FTP Configurations (cont'd)
Function
Set storage directory where recorded video and snapshots will be
stored.
Enable Emergency (Local) to save to the local Micro SD card when the
network connection to FTP is unavailable.
65) will be saved to the specified NAS server.
Figure 5-33 NAS Configuration Interface
Table 5-23 NAS Configurations
Function
Check this box to enable the NAS option.
Set the IP address of the NAS server.
Set storage directory where recorded video and snapshots will be
stored.
Figure 5-34 Record Control Configuration Interface
Configuring Camera Settings | 67
Path on
800-22757 - A - 02/2017