Accessing The Camera From A Web Browser; Figure 2-8 Firmware Upgrade; Figure 2-9 Firmware Upgrade 2 - Honeywell Performance Series User Manual

Performance Series IP Camera Software Configuration Guide
Select the Maintenance tab from the left pane as shown in
and click

Figure 2-8 Firmware Upgrade

The devices were grouped by model. To upgrade the firmware:
1. Select the target device(s) under a model.
2. Click BROWSE and select the upgrade file from your computer.

Figure 2-9 Firmware Upgrade 2

3. Click APPLY. You can check the progress status in the device list.

Accessing the Camera from a Web Browser

To access the camera from a web browser, click
shown in Figure
The Unified Tool will choose Chrome as default browser to access the camera
Note
webpage firstly. If you haven't installed Chrome, it will run IE instead. When neither
Chrome nor IE is available, it will open Edge to access the camera.
8
and the following window is displayed:
2-6.
Figure 2-6, select target device(s)
next to the IP address of the device as