Viavi AVX-10K Operation Manual page 50

Three antennas are shipped with the AVX-10K-CNS kit. The larger panel antenna (AC10K-FPANT) is
intended for use with all Transponder, TCAS, Target Generation and the DME Applications.
The other two antennas (AC10K-ANT-ILS and AC10K-ANT-MB) are intended for use for Navigation,
COMMs and ELT Testing. The AC10K-ANT-ILS antenna has a rubber base and can be extended. The
AC10K-ANT-MB antenna is short, non-extendable and rubber encased (shown below on the right).
The intended usage for these antennas is described here:
Antenna
AC10K-ANT-ILS
AC10K-ANT-MB
Note: For most cases of ILS Testing (including Marker Beacon), the extendible ILS antenna
alone should be sufficient.
Rev. 002
22135254
Non-extended Usage: Glide Slope testing; Marker Beacon; ELT 406 MHz Testing
Extended Usage: Localizer and ELT 121.5/243 MHz Testing
Specific Marker Beacon Testing (Testing for MTL levels)
VIAVI
Usage
AVX-10K Operation
2022-08-25
Page 48 of 139