Viavi AVX-10K Operation Manual page 36

side of the AVX-10K. Click the Force Software Update option and then click the Update button
in the lower right corner.
• Hardware and Software Revisions – This is where you go when someone from VIAVI asks what
hardware or software revisions your unit has.
Software Options – This screen provides a listing of all of the VIAVI software options aligned
•
with the AVX-10K (and more). This will also reflect the activation level of the respective option
(Enabled or Upgradeable).
Hardware Options – This screen reflects the ID and Serial Number of the installed GPS Module.
•
• Calibrations – Simply shows last calibration date.
• Position Format Setting – This is a replicated setting from the ADS-B, GICB, and Traffic (Target
Gen) setup screens that allows you to change the Latitude and Longitude format being used.
e.g. "DD MM SS.SS". This setting is globally reflected for all applications.
• Home Screen – This setting allows for enabling or disabling the top-level ribbons on the Home
Screen. For instance, if you don't have the ELT software option and you do not need to see it on
the Home Screen, toggle ELT to off.
Automatic File Purge – Having this option set to ON will help keep the file folders from filling up.
•
This function works in conjunction with StrataSync™ so that whenever files are sent to your
StrataSync™ account, they are removed from the AVX-10K file folder. You can also trigger a
manual file purge from here to remove all reports.
• Save Location – This setting allows you to select where you want report files to be saved. They
can be saved locally to the AVX-10K file folders or to a connected USB drive or to both, where
applicable.
Restore Factory Defaults – Resets all System and Application Settings back to factory defaults
•
and allows for you to selectively delete all files in the file folders and clear international settings.
• Power Off – If you are tired of pressing the green button to turn the device off, you can come
here and do the same thing. This will also allow you to automatically reboot after power off.
Template Management – This allows you to Save (and name) / View / Delete / Load a template
•
for all settings. The named template will appear in the top bar of the Home Screen once loaded.
More information on Templates can be found in the StrataSync manual. Templates are a
snapshot of all of the system settings and are a way to align configurations across multiple AVX-
10Ks. Templates are pushed out to test sets from StrataSync. Once available on the AVX-10K
after a sync, the template can be loaded from this screen.
Screen and Power Management – These settings allow you to set the backlight, the backlight
•
timeout and the power off delay.
• Sounds – Toggle Play Chime on Power Up/Down and control the associated volume.
• Theme – Changes the color scheme of the test set.
Rev. 002
22135254 VIAVI
AVX-10K Operation
2022-08-25
Page 34 of 139