Table of Contents
Advertisement
termine how to use the GlucoMen Day CGM to manage
your diabetes.
/ 2
Parts of the system
2.1
System overview
The GlucoMen Day CGM uses a single-use, disposable
sensor inserted into the interstitial fluid that converts glu-
cose levels into the electrical signal. The sensor is located
within the sensor assembly, which includes the sensor,
sensor adhesive patch, and sensor guide. A rechargeable
transmitter attaches to the sensor assembly, which is se-
cured to the skin with the adhesive patch. The transmit-
ter sends the glucose readings to the GlucoMen Day App
using Bluetooth
low energy technology.
®
Sensor Assembly
Overpatch
Transmitter
Sensor Insertion Tool
Transmitter
Charger
App
CAUTION
• Check the expiration date on the pouch before using.
• Do not modify any part of the GlucoMen Day CGM or use
components other than those specified in this guide.
• The GlucoMen Day CGM System contains small parts
that may be a choking hazard.
/ 2.2
Sensor Assembly
CAUTION
• Do not use the sensor assembly if the sterile pouch is
open or damaged. Do not handle the sensor assembly un-
til you are ready to insert the sensor because the sensor
can become contaminated.
• Do not wear the sensor in a hot tub.
IMPORTANT: The transmitter and sensor adhesive pa-
tch can be worn while bathing and showering. You can
also swim with the transmitter and sensor in place up to a
depth of 1 metre (3 feet) for up to 30 minutes.
If you do not have an overpatch, you can use medical tape
around the edges of the adhesive patch.
CAUTION
Do not throw away the transmitter, the sensor insertion tool,
or the transmitter charger when you dispose of the sensor.
The transmitter is intended to be recharged and used again.
IMPORTANT: If you do not have an overpatch, you can
use medical tape around the edges of the adhesive patch.
English
7
Advertisement
Table of Contents
