Table of Contents
Advertisement
English
Home screen
message
No transmitter
Connecting tran-
smitter...
Activating
transmitter...
Remove transmitter
[TRANSMITTER ID]
from the charger to
activate.
Ready to start
Follow sensor
insertion
instructions. It may
take 1-3 minutes to
detect the sensor.
Starting
session...
Waiting for cali-
bration
Add a blood glucose
meter reading.
Collecting data...
26
What it means
There is no transmitter connected to the
app. Tap Connect transmitter to CONNECT A
TRANSMITTER.
See SECTION 8.5 for details about connecting
a transmitter.
The system is connecting to your transmitter.
The system is trying to activate the transmitter
indicated by [TRANSMITTER ID].
You must remove the transmitter from the
charger in order to activate it.
See SECTION 3.3 for details about activating
a transmitter.
A transmitter is connected, but a session has
not been started.
See CHAPTER 4 for details about starting a
session.
The session is starting. A progress bar indica-
tes the amount of time remaining before the
session has started.
The system is ready to be calibrated.
See CHAPTER 5 for details about calibration.
After the first calibration of a session, the
system needs time to collect data. A progress
bar indicates the amount of time remaining.
Home screen
What it means
message
Stopping session...
The session is stopping.
Bluetooth is off
Bluetooth is turned off. Bluetooth must be
Turn on Bluetooth to
turned on, so the transmitter and app can
use your CGM.
communicate.
Out of space
Your smart device is out of storage space and
Free up space on
the app cannot display glucose readings. If
your phone to use
you free up space, the app will display glucose
your CGM.
readings.
Signal lost
The app does not detect a signal from the
Make sure your
transmitter. Make sure the transmitter is near
transmitter is
the app.
nearby. It may take
time to reconnect.
6.4
Trend chart
6.4.1
Chart area
The trend chart shows recent glucose levels, so you can
see your trends over time. The transmitter sends one glu-
cose reading per minute. The CGM displays glucose levels
from 2.2-22.2 mmol/L.
A. Time (x-axis)
B. Glucose level (y-axis)
C. High glucose line
D. Low glucose line
E. Target range
See SECTION 6.4.3 for details.
Advertisement
Table of Contents
