Table of Contents
Advertisement
Charger light
Flashing
green light
Solid
green light
Flashing
blue light
Solid
blue light
Flashing
red light
Solid
red light
8.5
Connecting a transmitter
Please refer to SECTION 3.3 for Connecting a transmitter
instructions.
What it means
The transmitter is charging. This
transmitter may take up to 4 hours to
be fully charged.
The transmitter is fully charged and
ready to use for a session.
The transmitter is ready to pair with
the app.
This light appears when you press the
button on the charger. See SECTION
3.3 for details about connecting a
transmitter to the app.
The transmitter is successfully paired
with the app.
After 60 seconds this light will turn
green (flashing or solid) to indicate
that the transmitter is charging or
charged.
Lasting up to 5 seconds: The
transmitter has been detected but is
not communicating with the charger.
This may occur when the transmitter
is placed into the charger.
Lasting longer than 5 seconds: An
error has occurred.
See SECTION 15.6 for details about
charger errors.
An error has occurred. The transmitter
is either not charging or did not
successfully pair with the app. See
SECTION 15.6 for details about
charger errors.
8.6
Activating a transmitter
Although you can connect multiple transmitters to the
app, only one transmitter can send CGM readings to the
app. That transmitter is referred to as the active transmit-
ter. It is important to understand which transmitter is acti-
ve before you start a session.
If you only have one transmitter connected to the app, it
is automatically the active transmitter.
If you have multiple transmitters connected to the app,
you can choose which one to activate.
8.6.1
Identifying the active transmitter
Before you start a session, it is important to make sure
that you are using the active transmitter.
1.
In the app, tap the DEVICES
button.
On Android devices, you may
need to tap the BACK ARROW
until you see the bottom
buttons.
3.
Under CURRENT SESSION,
locate the ID listed under
TRANSMITTER. This is the ID
of the active transmitter.
OR
In the list of AVAILABLE
TRANSMITTERS, locate the
transmitter with the ACTIVE
label. The 7-digit alphanumeric
ID listed in that row is the ID of
the active transmitter.
English
2.
Tap TRANSMITTERS.
37
Advertisement
Table of Contents
