Alert Status Indicators; Glucose Alerts - A.MENARINI GlucoMen Day CGM User Manual

Hide thumbs

Table Of Contents

Table of Contents

Tap the alert level to define when the

alert will occur. The alert level is dif-

ferent for each alert. For example, if

you choose 13.9 mmol/L for the high

glucose alert level, GLUCOSE ABOVE

13.9 mmol/L will be displayed.

On Android: Tap OK to save your se-

lection.

On iOS: Your selection is automati-

cally saved.

Tap the REPEAT setting to determine when the alert will repeat if

the alert level still applies.

On Android: Tap OK to save your selection.

On iOS: Your selection is automatically saved.

NOTE:

•

The projected high and low alerts cannot be assigned an

alert level because the alert level is automatically determi-

ned based on the high and low glucose alerts, respectively.

•

The calibration alert does not have an alert level because

it is defined by when the system needs to be calibrated.

•

The urgent low and critical low battery alert levels cannot

be changed.

CAUTION

After changing the alert settings, there may be a delay be-

fore you receive alerts based on the new settings. During

this delay, alerts will be based on the previous settings.

See SECTION 7.5 for details.

7.5

The alert status indicators let

you know if the GlucoMen Day

App and the transmitter are

using the same alert settings

and if your notification settings

could prevent alerts from beha-

ving as expected.

NOTE: Alert status is the same for all alerts. If at least

one alert is changed, the status is PENDING until the new

settings are synced with the transmitter.

7.6

You can set alerts associated with your current and future

glucose levels. These alerts will notify you when your glu-

cose is high, low, or rapidly changing.

*Glucose levels and rates of change are examples only.