Table of Contents
Advertisement
English
1.
Tap the GlucoMen Day CGM
App icon to open the app.
3.
Enter your email and
password.
If you forgot your password, see SECTION 11.6 for steps to reset
your password.
NOTE: Tap the (
) icon to show or hide your password.
3.4
Connect a transmitter
The GlucoMen Day CGM Devices kit includes two transmit-
ters so that you can use one while charging the other.
The transmitters communicate with the GlucoMen Day App
using Bluetooth and must be connected to the app before
they can be used. This process is also called pairing .
IMPORTANT: • Your transmitter communicates with the
app using Bluetooth wireless technology. Your smart devi-
ce must have Bluetooth turned on to continue.
• Read all pairing instructions before attempting to pair
10
2.
Tap LOG IN.
4.
Tap LOG IN.
your transmitter. Once you press the button on the char-
ger, the transmitter will be in pairing mode for 60 seconds.
If you are unable to successfully pair the transmitter du-
ring this time, you will need to restart the pairing process.
CAUTION
You can only connect a transmitter to one smart device at
a time. If you connect the transmitter to a second smart
device, it will no longer be connected to the first smart
device.
IMPORTANT: If this is the
first time you have connected
a transmitter, the app will di-
splay hints to point out the
next step and highlight impor-
tant features. When you are
done reading the hints, tap OK.
1.
Locate the 6-digit numeric PIN (A)
on the bottom of the transmitter.
Record the 6-digit numeric PIN, whi-
ch you will need in step 7.
2.
Place the transmitter in the charger
and connect to a power source. Keep
the transmitter in the charger until
pairing is complete.
The light on the charger may flash red
for up to 5 seconds. Make sure the li-
ght has turned green (flashing if not
fully charged or solid if fully charged)
before starting step 3.
See SECTION 8.4 for details about
charging the transmitter.
A
Advertisement
Table of Contents
