A.MENARINI GlucoMen Day CGM User Manual page 27

Transmitter signal icons
The transmitter
signal icons
indicate the
connection status
of the active
transmitter.
6.3.4 Calibrate button
Tap the CALIBRATE button when you want to enter a blo-
od glucose reading from a meter. This button is disabled if
you cannot calibrate right now.
See CHAPTER 5 for details about calibration.
6.3.5 Information banner
The information banner appears when there is informa-
tion to display. In some cases, you can tap the banner
for details.
What the banner
What it means
says
Sensor insertion A session is not currently in progress.
instructions
Tap to view instructions for inserting a sensor
and starting a new session.
Time to calibrate It is time to calibrate.
Tap the banner or the CALIBRATE button to
enter a blood glucose reading from a meter.
The active transmitter signal is
not detected.
The active transmitter signal is
detected.
What the
What it means
banner says
Cannot calibrate You cannot calibrate the system right now. Tap
right now the banner for details about why you cannot
calibrate.
See SECTION 15.3 for details about why cali-
bration may not be possible.
Saving The system is saving the calibration reading.
calibration
Estimated Glucose levels are currently estimated.
glucose
Tap the banner for details about why glucose
levels are estimated.
See SECTION 6.5 for details about estimated
glucose.
Temporary issue Something has gone wrong and the app
cannot display glucose readings. This is a
system-level issue that should resolve itself.
Contact Customer Service if the issue is not
resolved after 1 hour.
6.3.6 Home screen messages
If the GlucoMen Day App cannot
display a current glucose level,
it may display a message indi-
cating what is happening. The
message either indicates an
ongoing process or provides in-
structions for the next step.
English
25