Charging A Transmitter - A.MENARINI GlucoMen Day CGM User Manual

English
8.3.3
Available transmitters
This section shows the transmitters that are connected to
the app. The active transmitter is marked with an ACTIVE
badge.
Tap on a row to view details for that transmitter.
8.4

Charging a transmitter

The transmitter is a rechargeable component. When ful-
ly charged, the transmitter can last for the entire 14-day
session.
1.
Place the transmitter in the charger.
2.
Insert the Micro USB end of the USB cable into the charger.
36
3.
Insert the other end of the USB cable into a computer.
Make sure the computer is turned on.
NOTE: If necessary, you can use an AC wall adapter that complies
with the specifications in SECTION 17.4.5.
The light on the charger indicates the status of the tran-
smitter.
See SECTION 8.4.1 for details about the charger light.
This transmitter may take up to 4 hours to be fully char-
ged.
CAUTION
If you want to use a computer to charge the transmitter, a
USB port supporting a minimum charging current of 100
mA is required. Check your computer user manual or con-
tact the computer manufacturer to make sure the device
meets these requirements. The USB port on your PC must
comply with 60601-1 ed. 3.1 at a minimum.
8.4.1 Charger light
While the transmitter is in the charger, the light (A) on the
charger indicates the transmitter status.
A