A.MENARINI GlucoMen Areo Quick Manual

All manuals and user guides at all-guides.com
Quick Guide
Blood glucose measurement with wireless transmission
How to use the sampler
GlucoJect Dual PLUS ®
Wash hands or
1.
the alternative site
(AST). Unscrew the
sampler's tip by tur-
ning it counterclock-
wise.
Insert a new
2.
sterile lancet into
the lancet holder and
push it fully.
Adjust the puncture
3.
depth by rotating the
tip. 1-2 for soft or thin
skin, 3 for normal skin,
4-5 for thick or harde-
ned skin.
Error codes and messages
ER 1 System error hardware. Remove and insert the batteries again and repeat the
test with a new test strip. If error code persists, please contact customer service.
ER 2 Test strip is damaged or used, or have the blood sample applied before
"blood drop symbol" began to fl ash on the screen. Repeat the test
with a new strip.
Er 3
Test strip was given the small amount of blood. Stick again to repeat
the test with a new test strip and the right amount of blood.
Er 4
Test strip was removed or dislodged during the countdown. Repeat
the test with a new test strip.
NFC was disconnected during transmission. Repeat the NFC-transfer.
Er 5
If the problem persists, contact customer service.
Your test result is higher than 33,3 mmol/L!
HI
LO
Your test result is lower than 1,1 mmol/L!
CAUTION! If HI or LO appears, contact your health care provider before
changing your treatment. Shown HI or LO repeatedly even though your
blood sugar levels are high or low, contact customer service.
Customer Service: 040-32 12 70 info@menarinidiagnostics.se
NOTE! This is a concise quick reference guide. Detailed information can be found in the manual supplied with the meter.
CAUTION! NEVER use sampler on more than one per-
son. Take a new lancet for each sampling and
do not leave a used lancet in the sampler.
Pull out the sliding
4.
sleeve to lock the sam-
pler. Press and hold the
sampler against your
fi nger and press the
trigger.
Press the lancet ejec-
5.
tor with your thumb
while pulling out the
sliding sleeve for dis-
posing of the used
lancet.
Sampling AST
Place the sampler on the
skin at selected plug area.
Press and hold for a few
seconds, then press the
shutter release button
to take a blood test.
Medeon Science Park Per Albin Hanssons väg 41, hus D SE-205 12 Malmö
Tel 040–32 12 70 Fax 040–32 12 71 www.menarinidiagnostics.se
English
Error codes and messag
ER 1 System error hardware. Remove
test with a new test strip. If error c
ER 2 Test strip is damaged or used
"blood drop symbol" began t
with a new strip.
Er 3
Test strip was given the small
the test with a new test strip a
Er 4 Test strip was removed or dis
the test with a new test strip.
Er 5 NFC was disconnected during
If the problem persists, conta
HI Your test result is higher than
LO
Your test result is lower than
CAUTION! If HI or LO appears
changing your treatment. Sho
blood sugar levels are high or
Customer Service: 040-32 1
NOTE! This is a concise quick reference
Quick Guide
Blood glucose measurem