Table of Contents
Advertisement
Transmitters
What it means
screen message
Connecting
The system is connecting to your transmitter.
transmitter...
Remove transmitter
The system is trying to activate the transmitter
[TRANSMITTER ID]
indicated by [TRANSMITTER ID].
from the charger to
You must remove the transmitter from the
activate.
charger in order to activate it.
Activating
See SECTION 8.6 for details about activating
transmitter...
a transmitter.
NEXT STEP
A transmitter is connected, but a session has
Follow sensor
not been started.
insertion
See CHAPTER 4 for details about starting a
instructions. It may
session.
take 1-3 minutes to
detect the sensor.
Starting session...
The session is starting. A progress bar
indicates the amount of time before you can
calibrate.
See CHAPTER 5 for details about calibrating.
NEXT STEP
Time to calibrate.
Enter a blood
glucose reading.
Saving calibration...
The system is saving the calibration reading.
Collecting data...
After the first calibration of a session, the
system needs time to collect data. A progress
bar indicates the amount of time remaining.
Stopping session...
The session is stopping.
8.3.2
Current session
The current session details section provides information
about the current session.
A. Session status
Status is either STARTED or NOT STARTED.
B. Active transmitter
ID of the active transmitter.
C. Start time of current session
D. End time of current session
End time is 14 days after the start time. The end time is
only visible if a session is in progress.
E. Time of last calibration
F. Calibrate button
Tap to calibrate. This button will be disabled if calibration
is not possible.
G. Stop button
Tap to stop the session. This button will be disabled if a
session is not in progress.
G
A
B
F
C
English
D
E
35
Advertisement
Table of Contents
