Table of Contents
Advertisement
Issue
Edges of the adhesive patch are peeling up.
Solution
Follow the next steps to apply the overpatch, if needed.
NOTE: The overpatch is only needed if you notice that the
edges of the adhesive patch are starting to come up.
1.
Fold the overpatch along the line
that divides the two halves of the
liner, with the liner side facing
outwards.
Peel off the liner, starting in the cen-
tre, where the two halves of the liner
meet.
IMPORTANT: Make sure the overpatch does not fold on itself
before or during application.
2.
Apply the overpatch so that it covers
the edges of the adhesive patch.
/ 16
Connected Partners
16.1
Adding a connected partner
In order to add a connected partner, you need an activa-
tion code from the partner with whom you want to share.
If you have not received a code, contact the partner to
request one.
1.
In the app, tap the PROFILE button.
On Android devices, you may need to tap the BACK ARROW until
you see the bottom buttons.
2.
Tap CONNECTED PARTNERS.
4.
In the ENTER CODE field, enter
the activation code you recei-
ved from your connected par-
tner software or app.
16.2
Deactivating a connected partner
1.
In the app, tap the PROFILE button.
English
3.
On Android: Tap the (+)
button.
On iOS: Tap ADD A PARTNER.
5.
Tap ACTIVATE. The partner
will be listed under YOUR PAR-
TNERS on the CONNECTED
PARTNERS screen. Your data
will be automatically sent to
the partner until you deactiva-
te the partner.
57
Advertisement
Table of Contents
