Other Buttons; Screen Calibration; Warning Messages; Saving Modifications - Carrier AquaForce 61XWHZE Control Manual

4 - USER INTERFACE: OVERVIEW

4.7 - Other buttons

Button Description
Save button: Press the button to save the modification.
Cancel button: Press the button to cancel the
modification.
Log in button: Press the button to log in at specific
access level.
Log off button: Press the button to log off.
Confirm button: Press the button to confirm the
modification.
Cancel button: Press the button to cancel the
modification.
Up button: Press the button to scroll up.
Down button: Press the button to scroll down.
Force button: Press the button to force the parameter.
Remove Force button: Press the button to remove
the forced parameter.
Trending button: Press the button to display trends.
Refresh button: Press the button to refresh the view.
Zoom in button: Press the button to magnify the
current view.
Zoom out button: Press the button to expand the
current view.
Left button: Press the button to go to the left.
Rewind button: Press the button to go to the left faster
than normal.
Right button: Press the button to go to the right.
Fast-forward button: Press the button to go the right
faster than normal.

4.8 - Screen calibration

The purpose of screen calibration is to make sure that the software
acts correctly upon pressing icons on the user interface.
To calibrate the screen
1. Press and hold anywhere on the screen.
2. The calibration process will start.
3. Please follow instructions displayed on the screen:
"Touch the target in (...) screen corner"

4.9 - Warning messages

Warning messages are used to inform the user that a problem
occurred and the requested action cannot be completed successfully.
Login failure
If the wrong password is provided, the following warning message
will be displayed:
"The password entered does not match any stored passwords"
■ Press the Confirm button and type the correct password
(see section 5.7).

4.10 - Saving modifications

In case a parameter has been changed, but not saved with the
Save button, the following warning message will be displayed:
"Your recent changes haven't been saved (...)"
■ Press the Confirm button to continue without saving the
modification.
■ Press the Cancel button to come back to the current screen
and then save the modification with the Save button.
13