Carrier AquaForce 61XWHZE Control Manual page 18

5 - USER INTERFACE: MENU STRUCTURE
RUNTIME – Run Times
No. Name Status
1 HR_MACH -
2 st_mach -
3 hr_cp_a -
4 st_cp_a -
5 hr_cp_b -
6 st_cp_b -
7 hr_exv_a -
8 hr_exv_b -
9 hr_cpum1 -
10 hr_cpum2 -
11 hr_hpum1 -
12 hr_hpum2 -
*Depends on the selected language (English by default).
MODES – Modes
No. Name Status
1 m_delay no/yes
2 m_2stpt no/yes
3 m_reset no/yes
4 m_demlim no/yes
5 m_ramp no/yes
6 m_pmprot no/yes
7 m_pmpper no/yes
8 m_night no/yes
9 m_slave no/yes
10 m_autoc no/yes
11 m_lowEwt no/yes
12 m_cpmpro no/yes
13 m_cpmppr no/yes
14 m_ice no/yes
15 m_sst_a no/yes
16 m_sst_b no/yes
17 m_sst_c no/yes
18 m_map_a no/yes
19 m_map_b no/yes
20 m_map_c no/yes
21 m_hp_a no/yes
22 m_hp_b no/yes
23 m_hp_c no/yes
*Depends on the selected language (English by default).
SETPOINT – Setpoint Table
No. Name Status
-12.0 to 55.0
1 csp1
10.4 to 131.0
-12.0 to 55.0
2 csp2
10.4 to 131.0
-28.9 to 26.0
3 ice_sp
-20.0 to 78.8
0.1 to 11.1
4 cramp_sp
0.2 to 20.0
35.0 to 85.0
5 hsp1
95.0 to 185.0
18
Unit Displayed text*
hour Machine Operating Hours
- Machine Starts Number
hour Compressor A Hours
- Compressor A Starts
hour Compressor B Hours
- Compressor B Starts
hour EXV A Hours
hour EXV B Hours
hour Cooler Pump #1 Hours
hour Cooler Pump #2 Hours
hour Condenser Pump #1 Hours
hour Condenser Pump #2 Hours
Unit Displayed text*
- Start Up Delay In Effect
- Second Setpoint In Use
- Reset In Effect
- Demand limit Active
- Ramp Loading Active
- Cooler Pump Rotation
- Pump Periodic Start
- Night Low Noise Active
- Master Slave Active
- Auto Changeover Active
- Heating Low EWT Lockout
- Condenser Pump Rotation
- Cond Pump Periodic Start
- Ice Mode In Effect
- Low Suction Circuit A
- Low Suction Circuit B
- Low Suction Circuit C
- Map compressor Circuit A
- Map compressor Circuit B
- Map compressor Circuit C
- High Pres Override Cir A
- High Pres Override Cir B
- High Pres Override Cir C
Default Unit Displayed text*
20.0 °C
Cooling Setpoint 1
68.0 °F
20.0 °C
Cooling Setpoint 2
68.0 °F
6.7 °C
Cooling Ice Setpoint
44.0 °F
0.6 ^C
Cooling Ramp Loading
1.0 ^F
70.0 °C
Heating Setpoint 1
158.0 °F
Description
Machine operating hours
Number of machine starts
Operating hours, compressor A
Number of starts, compressor A
Operating hours, compressor B
Number of starts, compressor B
Operating hours, EXV (circuit A)
Operating hours, EXV (circuit B)
Operating hours, cooler pump 1
Operating hours, cooler pump 2
Operating hours, condenser pump
Not applicable to this unit
Description
Start-up delay in effect
Second setpoint in use
Setpoint reset active
Demand limit active
Ramp loading active
Cooler pump rotation
Pump periodic start active
Night low noise active
Master/Slave mode active
Not applicable to this unit
Heating low EWT lockout
Not applicable to this unit
Condenser pump periodic start
Ice storage mode active (EMM option)
Low suction, circuit A
Low suction, circuit B
Not applicable to this unit
Compressor mapping, circuit A
Compressor mapping, circuit B
Not applicable to this unit
High pressure override, circuit A
High pressure override, circuit B
Not applicable to this unit
Description
Cooling setpoint 1 (used during occupied periods)
Cooling setpoint 2 (used during unoccupied periods)
Cooling ice setpoint
Cooling ramp loading setpoint (rate at which the water
temperature may change within one minute in Cooling)
Heating setpoint 1 (used during occupied periods)