Carrier AquaForce 61XWHZE Control Manual page 20

5 - USER INTERFACE: MENU STRUCTURE
QCK_TST1 – Quick Test 1 (continued)
No. Name Status
29 Q_ALARM off/on
30 Q_ALERT off/on
31 Q_DEXV_A 0 to 100
32 Q_DEXV_B 0 to 100
33 Q_3W_VLV 0 to 100
*Depends on the selected language (English by default).
IMPORTANT: To enable the Quick Test functionality, the unit
must be stopped (Local off mode).
Trendings
No. Name
1 GENUNIT_CTRL_PNT
2 TEMP_COOL_EWT
3 TEMP_COOL_LWT
4 TEMP_COND_EWT
5 TEMP_COND_LWT
6 TEMP_SCT_A
7 TEMP_SST_A
8 TEMP_SCT_B
9 TEMP_SST_B
10 INPUTS_CURREN_A
11 INPUTS_CURREN_B
12 EXV_CTRL_EXV_A
13 EXV_CTRL_DSH_A
14 EXV_CTRL_ov_exv_a
15 EXV_CTRL_EXV_B
16 EXV_CTRL_DSH_B
17 EXV_CTRL_ov_exv_b
18 EXV_CTRL_eco_sha
19 EXV_CTRL_ov_eco_a
20 EXV_CTRL_eco_shb
21 EXV_CTRL_ov_eco_b
22 LOADFACT_cap_t_a
23 LOADFACT_cap_t_b
24 LOADFACT_smz
25 LOADFACT_over_cap
*Depends on the selected language (English by default).
OPT_STA – Software Options
No. Name Status
1 opt5 no/yes
2 opt6 no/yes
3 opt149 no/yes
4 opt149B no/yes
5 opt295 no/yes
*Depends on the selected language (English by default).
20
Default Unit Displayed text*
- - Alarm Relay Status
- - Alert Relay Switch
0 % DGT EXV Position A
0 % DGT EXV Position B
- % 3 way valve position
Status Unit
- %
- °C/°F
- °C/°F
- °C/°F
- °C/°F
- °C/°F
- °C/°F
- °C/°F
- °C/°F
- AMPS
- AMPS
- %
- ^C/^F
- -
- %
- ^C/^F
- -
- ^C/^F
- -
- ^C/^F
- -
- %
- %
- %
- -
Unit Displayed text*
- OPT5: Medium Brine
- OPT6: Low Brine
- OPT149: BACnet
- OPT149B: Modbus
- OPT295: Fast Capacity Recovery Not applicable to this unit
Description
Alarm relay status
Alert relay switch
DGT EXV position, circuit A (100% = EXV fully open)
DGT EXV position, circuit B (100% = EXV fully open)
3-way valve position
Description
Control point
Cooler entering fluid
Cooler leaving fluid
Condenser entering fluid
Condenser leaving fluid
Saturated condensing temperature, circuit A
Saturated suction temperature, circuit A
Saturated condensing temperature, circuit B
Saturated suction temperature, circuit B
Motor current, circuit A
Motor current, circuit B
EXV position, circuit A
Discharge superheat, circuit A
EXV override, circuit A
EXV position, circuit B
Discharge superheat, circuit B
EXV override, circuit B
Economizer superheat, circuit A
EXV override, circuit A
Economizer superheat, circuit B
EXV override, circuit B
Actual capacity, circuit A
Actual capacity, circuit B
Load/unload factor
Active capacity override
Description
Not applicable to this unit
Not applicable to this unit
Parameter set to "yes" means that BACnet option which requires the
Software Key is activated (see also section 6.19)
Parameter set to "yes" means that Modbus option which requires the
Software Key is activated (see also section 6.20)