Maintenance Summary - 4.000 Operating hours
D500
- Perform data backup
Orientation
Procedure
Maintenance Instructions
R200
LR1702.10181 - 05.06.2019
Carrying out the maintenance activities described below requires
special knowledge. For this reason, these maintenance activities
must only be carried out by staff that has received adequate training
by the machine manufacturer!
If data from the control is lost, the backup CD/DVD always provides the ability to
quickly restore the operation of the machine. If machine data have been modified as
part of maintenance or repair work, a data backup must be performed. In this case,
a backup of the PLC and NC archives is sufficient. The data can be saved to a
floppy disk or USB stick, depending on the machine control equipment. In a system
recovery, the backup CD/DVD created when the machine was delivered is restored
on the machine. Afterwards, the PLC and NC archive files are loaded from the
floppy disk or USB stick.
1. Perform data backup.
105