Table of Contents
Advertisement
Resetting the CANcockpit
The CANcockpit displays the different frequencies of maintenance operations. After each maintenance operation, you can
reset the CANcockpit.
001 = Maintenance to be carried out once at 150 hours.
002 = Maintenance to be carried out every 500 hours.
003 = Maintenance to be carried out every 1000 hours.
To reset one of the 3 periods of the CANcockpit displayed:
• Turn the battery switch to disconnect it.
• Hold down the button fig. A and turn the contact key (without
starting the engine), the display shows a dark area.
• Release the pushbutton, the display indicates the maintenance code.
• Press the pushbutton again until this screen switches off completely then release the pushbutton.
The CANcockpit then goes into auto test mode, the rev counter needle moves and the display is backlit, and the software
version is displayed. The counter is then reset and returns to normal user mode.
Access to cabin roof
To work on certain cabin components (air conditioning, fuses, electrical
circuits etc.), you have to raise the cabin roof.
• Unscrew the 2 screws fig.1 located inside the cabin.
• Raise the roof and position the holding bar in the notch provided
for this purpose.
±
WARNING! To avoid the roof falling, ensure that the holding bar fig.2 is correctly in place as shown in the picture.
6 - Maintenance
2
1
79
Advertisement
Table of Contents
