Cancockpit - Rev Counter; General Information; Description Of Messages; 10. Partial And Total Hour Meter - Hardi ALPHA evo ALU-TWIN FORCE Instruction Book

CANcockpit - rev counter

General information

The multi-function rev counter is dedicated to engine management. It is made up of an electronic rev counter and a display
that shows the main engine data, the frequency of maintenance operations and any errors in the engine and the hydraulic
transmission.

Description of messages

1. Engine water temperature
2. Volume of fuel in the tank
3. Theoretical forward speed
4. Engine oil pressure
5. Battery charge voltage
6. Turbocharger pressure
7. Faults in hydraulic transmission
8. Hydraulic pressure of the transmission
9. Immediate fuel consumption

10. Partial and total hour meter

11. Engine faults
12. Engine rev counter
13. Priority faults in hydraulic transmission (SD error)
14. Maintenance intervals (001-002-003)
15. Pushbutton information display
vitesse calculée (théorique) en f(posit.joystick)
Partial and total hour meter
1. Total number of hours
2. Partial number of hours
• Press the pushbutton fig.4 for 5 seconds to reset the partial hour
counter to zero.

Maintenance

The maintenance frequency is defined as follows:
1. First servicing after 150 hours
2. Servicing every 500 hours
3. Servicing every 1000 hours
After maintenance operations, the period displayed should be reset.
• Turn the battery switch to disconnect it.
• Hold the pushbutton down fig.11, then turn the starter key (without starting up), the display shows a dark area.
• Release the pushbutton; the display indicates the maintenance code to be reset
• Press the pushbutton again until this screen switches off completely, then release the pushbutton. The CANcockpit
goes into auto test mode (the rev counter needle moves, the display is backlit), and the software version is displayed,
then the CANcockpit returns to normal user mode.
5- Operation
10.0 l/h
+
-
15 km/h
!
200 bar
65