Table of Contents
Advertisement
Spraying
Safety information
±
WARNING! Always be careful when working with plant protection chemicals. Protective clothing and equipment
should be worn when handling chemicals, preparing the liquid and when spraying and cleaning the sprayer. For
further information, see the [SPRAY TECHNIQUE] book.
±
WARNING! To fill the main tank, follow the rules for using the filling devices. Ensure that you can fill from open water
(lakes, rivers etc.). For further information, see the [SPRAY TECHNIQUE] book.
±
WARNING! Ensure that the hand wash tank is always full and ready for use. It is always advisable to have clean water
available, especially during the liquid preparation phase.
±
WARNING! Always clean and wash the sprayer after use.
±
WARNING! Only mix chemicals in the tank after having checked their compatibility and always according to the
directions given by the manufacturer.
±
WARNING! Rinse the various liquid systems carefully before using a new chemical.
The following sections describe the procedures to follow to get the best out of your equipment, particularly when filling the
main tank, rinse tank and hand wash tank, filling with chemicals, spraying and rinsing the liquid systems.
Starting and adjusting the speed of the spray pump
The spray pump clutch can be activated in the cabin or by a control located outside fig.2.
System start-up
• Press the pushbutton fig.3 or fig.1 to start the spray pump. Its
speed can be adjusted using the control fig.4.
Shutting down the pump
Press the pushbutton fig.2 or fig.3 to shut down the spray pump.
5- Operation
ON
OFF
ON
OFF
49
Advertisement
Table of Contents
