Travelling In Offset 2-Wheel Steering - Hardi ALPHA evo ALU-TWIN FORCE Instruction Book

5- Operation

Travelling in offset 2-wheel steering

In this mode, only the front wheels can turn, while the rear wheels can be slightly inclined to the left or right. To use this
mode:
• Press the switch to activate [MANU] mode.
• Press the pedal and turn the steering wheel so that the front and rear wheels are in a straight line. The indicators fig.1
and fig.3 light up to indicate that the operating conditions in offset rear wheel steering have been met.
• Turn the wheel slightly while holding the pedal down to offset the
rear wheels as required.
• Release the pedal to keep the rear wheels in position. All indicators
are switched off.
To exit offset rear wheel steering:
• Turn the switch to the [AUTO] position to activate 4-WHEEL
STEERING mode.
• Turn the steering wheel until the indicator fig.1 lights up, 2-WHEEL STEERING mode is automatically activated.
68