Electrical incidents
Location of main components
The main computers for the machines are fitted in the cabin and can be accessed after removal of the protective plate.
1. Main circuit fuses and relays.
2. Retractable gangway control system.
3. 4-wheel drive control system (4RD version).
HC 9500 controller fuse
The HC9500 controller fuse is located behind the main circuit.
1. Maxifuse = 30 A
• Switch main circuit over to access the fuse fig.1.
• Check and replace if necessary
Main circuit fuses and relays.
•
7 - Troubleshooting
1
2
3
4
5
4. Flashing indicator unit.
5. Hydraulic transmission computer (SD).
6. Engine computer (EMR).
1
113