Parking Brake - Hardi ALPHA EVO II EcoDrive Instruction Book

Parking brake

The parking brake is used to keep the machine at a standstill. It acts on discs incorporated into the front and rear hydraulic
motors. The brakes are activated when the hydraulic pressure reaches zero.:
Engage the parking brake
• Pull the grip to neutral position to make the machine brake
(hydrostatic braking).
• Turn the speed selector to the parking brake position to
immobilise the machine.
μ
When the parking brake is engaged, any action on the grip has no effect of the movement of the machine
Release the parking brake
• Turn the speed selector to release the parking brake
• Make sure that the grip is in neutral position before pushing or pulling it to move the machine. .
±
WARNING! The parking brake is very effective. Avoid engaging it when the machine is moving, except in an extreme
emergency.
5 - Operation
1
81