Table of Contents
Advertisement
5 - Operation
Cabin
Suspension of the cab (If fitted)
The suspension of the cabin is pneumatic with 2 dampers placed between the chassis and the floor of the cabin. An air
presssure regulator maintains a constant pressure into the pneumatic dampers.
Setting the correct regulator pressure is essential for optimizing the suspension and comfort in the cabin.
• Pull down and turn the knob clockwise to increase the pressure.
To decrease, turn counterclockwise.
Operating pressure : 2,4 bar (34,8 psi)
Air conditioning
Description control panel
1. Ventilation control knob
2. Temperature inside or outside of the cab
3. Cab pressurisation button
4. LCD screen
5. Defrost button
Operating modes
OFF mode
When the speed blower knob is OFF, the system is stopped. In this case:
• Heating valve is closed
• A/C compressor is disabled
• The pump is disabled
• Blower is stopped
• Pressurisation is not operate
• LCD screen is off
106
6. Temperature knob
7. Pressurisation indicator light
8. Air conditioning button.
9. Reset the counter hours button
10. Filter replacement indicator light
+
2
1
3
STOP
Advertisement
Table of Contents
