Comfort, Normal, Power Mode - Hardi ALPHA EVO II EcoDrive Instruction Book

How to change the control of the advancement
The control of advancement can be controlled by either the grip or by the throttle pedal. Changing the control mode is
only possible when the machine is stopped
• Place the grip to the neutral position
• Press on button to change the travel speed control
Braking and stopping in automotive mode
• To slow down, pull more or less the grip to neutral position or
release the throttle pedal, the engine speed automatically adapts
to the travel speed of the machine.
• Press the braking pedal to reduce progressively the travel speed of
the machine. When the pedal is release, the travel speed stabilizes.
• To accelerate again, pull the grip to neutral position, until the travel
speed corresponding to the position of the grip is lower than the
forward speed of the machine, or press the throttle pedal.
How to escape the automotive mode
To escape the automotive mode is only possible when the machine is completely stopped
• Turn the speed selector to the desired position, the icon appears in
orange.
• Pull the grip to the neutral position, to engage the new selected
mode. The icon appears in white

Comfort, Normal, Power Mode

Acceleration and deceleration of the machine are adjustable with 3 predefined driving mode to match the profile of the
driver
These driving modes allows to obtain different behaviours of the machine in terms of reactivity. The Acceleration and
deceleration ramps are defined by the time required to reach the maximum speed
• COMFORT: Progressive acceleration.
• NORMAL: Intermediate acceleration.
• POWER: Reactive driving.
5 - Operation
0
0
kmh / kph
max
0
0
sec
93