10 Hours Service - Spraying Circuit
Fill with clean water and operate all functions.
Check for leaks using a higher spray pressure than normal.
Check nozzle spray patterns visually using clean water.
10 Hours Service - Brakes
Apply brake pedal and check function of trailer brakes.
10 Hours Service - Air Tank for Brakes
Drain the air tank for condensed water by opening the drain valve.
50 Hours Service - Greasing the Pump
When operating the pump, it must be greased every 50 hours with 30
grams of grease into each lubrication point.
μ
ATTENTION! In order to avoid excessive wear, it is important to
use a recommended lubricant! See the section "Recommended
Lubricants" for more information.
μ
ATTENTION! The pump MUST be stopped during greasing!
50 Hours Service - Transmission Shaft (PTO)
1. Check function and condition of the transmission shaft protection
guard. Replace any damaged parts.
2. Lubrication. See "Lubrication and Oiling Plan - PTO" on page 130.
6 - Maintenance
139