100 Hours Service - Hydraulic Motor For Pump - Hardi COMMANDER DELTA FORCE Instruction Book

6 - Maintenance

100 Hours Service - Hydraulic Motor for Pump

Check the coupling parts.
1. Remove the lid by unscrewing the two bolts in the sides.
2. Check the condition of the rubber parts (A) in between the steel
claws (B). If the rubber parts are worn away, the motor will be noisy
when rotating, and the steel parts will wear out quickly.
Replace worn parts.
3. Retighten the grub screws (C).
4. When finished, put the lid back on and mount the bolts.
142