Brakes; Filters; Technical Residue; Airborne Noise Emission - Hardi COMMANDER DELTA FORCE Instruction Book

8 - Technical Specifications

Brakes

Max. wear rates on brake components:
Sprayer volume
4500 litres
5500 / 7000 litres
Pressure settings for the load apportioning valve:
Situation Pressure in air tank
Released 0 bar
Empty main tank 2.8 bar
Half main tank 4.3 bar
Full main tank Max. pressure (6.5 bar)
€
DANGER! If one or more the values are exceeded, this may cause damages and sudden leaks on the sprayer. Risk of
injuries and fatalities.

Filters

The higher the number of mesh, the finer the filtration.
Size of openings in
Mesh
the filter
18 1.00 mm
30 0.58 mm
50 0.30 mm
80 0.18 mm
100 0.15 mm
*depending on selected nozzles
**not with PrimeFlow system

Technical Residue

Residue in the dilutable volume is mentioned in the table below.
The non-dilutable volume varies depending on the boom width and installed options in the fluid system.
Worst case technical residue for the sprayer with the largest tank, largest fluid system and widest spray boom is stated below.
Smaller booms and fluid systems with less options will have less residue.
Sprayer combination
Main tank: 7000 litres
FlexCapacity pump
PrimeFlow.

Airborne Noise Emission

Airborne noise emission from operating the sprayer relates to the two defined operator positions (in the tractor cab or
operating the chemical incorporator/filling device/TurboFiller). Reference measurements indicate only in the latter case
(operating the chemical filling device) a contribution from the sprayer of additionally 4 dB(A).
184
Drum dimensions
400 x 120 mm
412 x 160 mm
Color EasyClean
White -
Green Yes
Blue Yes
Red Yes
Yellow -
Dilutable volume for tank and fluid system
69 litres
Max. drum diameter
403 mm
414 mm
Filter name / position
Cyclone InLine**
-
-
-
Yes
-
Min. lining thickness
4.5 mm
5.5 mm
Tank strainer
- Yes
- -
Yes* -
Yes* -
Yes* -
Nozzle
-
-
Yes*
Yes*
Yes*