Table of Contents
Advertisement
6 - Maintenance
10 hours service - Nozzle filters
Check and clean.
10 hours service - Spraying circuit
Fill with clean water, operate all functions and check for leaks using higher spray pressure than normal. Check nozzle
spray patterns visually using clean water.
10 hours service - Brakes (optional equipment)
Apply brake pedal and check function of trailer brakes.
10 hours service - Brakes air tank (optional equipment)
Drain the air tank for condensed water at the drain valve.
10 hours service - Retighten bolts (suspension only)
Check that these 9 bolts - on each side of the COMMANDER - are
tight. Retighten if necessary. Bolt 8 and 9 are situated behind the
spring.
Tightening torque:
Bolt 1 = 24 Nm (retain nut on the backside of the mounting by a
spanner while adjusting bolt 1).
Bolt 2-9: 280 Nm
50 hours service - Transmission shaft
Check function and condition of the transmission shaft protection guard. Replace possible damaged parts.
6.5
Advertisement
Table of Contents
