Write The Program Memory To Rom - Mitsubishi Electric MELSEC-Q Series User Manual

6 FILES HANDLED BY BASIC MODEL QCPU

6.4.2 Write the program memory to ROM

6 - 8
To perform write to the standard ROM with GX Developer, perform "Write the program
memory to ROM" in online Write to PLC (Flash ROM) of GX Developer.
Files cannot be written to the standard ROM by online "Write to PLC" of GX Developer.
(1) Write the program memory to ROM
(a) The "Write the program memory to ROM" function allows a batch of files
stored in a program memory to be written in a standard ROM.
Refer to Section 12.1 for the procedure of writing the program memory to
ROM.
This function writes the debugged program stored in the program memory
to ROM.
(b) When the "Write a memory to ROM" function is executed, all files stored in
the standard ROM are erased before a batch of files stored in a program
memory are written. No files can be added to the standard ROM.
(c) The memory capacity of a standard ROM is the same as that of a program
memory. A memory of a larger size than the memory capacity of a program
memory cannot be used.
(d) For write of the program memory to ROM by GX Developer, check is made
in 180 seconds when the time check period of GX Developer is 180
seconds or shorter. To execute the "Write the program memory to ROM"
function via the CC-Link network by operating from a GX Developer at a
local station, set the length of CC-Link's CPU monitoring time (SW0A) to
180 seconds or longer.
MELSEC-Q
6 - 8