Mitsubishi Electric MELSEC-Q Series User Manual page 104

7 FUNCTION
7 - 8
(2) Setting the Output (Y) Status when Changing from STOP Status to
RUN Status
The output (Y) status before the STOP status when switching from STOP status
to Run status can be set in the PLC System sheet of the PLC Parameter dialog
box.
Output mode setting
at stop to RUN
(3) Precaution
If an output (Y) is forcefully turned ON with the Basic model QCPU in the STOP
status, it will not remain in the ON status even if the STOP status is switched to
the RUN status.
The output status is effected as set in the PLC System setting of the output mode
at STOP to RUN.
MELSEC-Q
7 - 8