Mitsubishi Electric MELSEC-Q Series User Manual page 55

4 SEQUENCE PROGRAM CONFIGURATION & EXECUTION
CONDITIONS
4 - 16
REMARK
1: The GX Developer input area can be switched ON and OFF by the following:
• Test operation by the GX Developer
• A network refresh by the MELSECNET/H network system
• Writhing from a serial communication module
• CC-Link automatic refresh
2: The output (Y) device memory can be switched ON and OFF by the following:
• Test operation by the GX Developer
• A network refresh by the MELSECNET/H network system
• Writhing from a serial communication module
• CC-Link automatic refresh
3: The remote input/output refresh area indicates the area used when automatic
refresh setting is made to the input (X) with MELSECNET/H and CC-Link.
Automatic refresh of the remote input refresh area is executed during END
processing.
MELSEC-Q
4 - 16