Mitsubishi Electric MELSEC-Q Series User Manual page 39

3 HARDWARE SPECIFICATION OF THE CPU MODULE
Item
Special link relay [SB]
Special link register [SW]
Step relay [S] 3
Index register [Z]
Pointer [P]
Interrupt pointer [ I ]
Special relay [SM]
Special register [SD]
Function input [FX]
Function output [FY]
Function register[FD]
Link direct device
Intelligent function module device
Latch (power failure conpensation)
range
Remote RUN/PAUSE contact
Clock function
Allowable momentary stop time
5VDC internal current consumption
Weight
External dimensions
3: The "step relay" is a device for the SFC function.
This cannot be used as the SFC function is not applicable to the Basic model QCPU.
4: This value includes the CPU module and base unit.
5: This value includes the CPU module, base unit, and power supply module.
3 - 3
Performance Specifications (continued)
Q00JCPU
1024 points (SB0 to 3FF)
1024 points (SW0 to 3FF)
2048 points (S0 to 2047)
300 points (P0 to 299)
128 points (I0 to 127)
The specified intervals of the system interrupt pointers I28 to
I31 can be set with parameters.(0.5 to 1000ms, Cunit in 0.5 ms)
Default I28 : 100ms I29 : 40ms I30 : 20ms I31 : 10ms
1024 points (SM0 to 1023)
1024 points (SD0 to 1023)
Device for direct access to link device.
MELSECNET/H use only.
Specified form at : J
J
Device for direct access to the buffer memory of the
intelligent function module. Specified form at : U
(Latch range can be set for B, F, V, T, ST, C, D, and W.)
RUN and PAUSE contacts can be set from among X0 to
7FF, respectively.
Year, month, day, hour, minute, second, day of the week
(leap year automatic distinction)
Accuracy -3.2 to +5.27s (TYP. +1.98s) /d at 0°C
Accuracy -2.57 to +5.27s(TYP. +2.22s)/d at 25°C
Accuracy -11.68 to +3.65s(TYP. -2.64s)/d at 55°C
Max. 20ms
(Min. 100VAC)
0.22A 4
0.66kg 5
H 98mm (3.86in.)
W 245mm (9.65in.)
D 97mm (3.82in.)
Model
Q00CPU
10 points (Z0 to 9)
16 points (FX0 to F)
16 points (FY0 to F)
5 points (FD0 to 4)
\ X , J \ Y , J
\ B , J \ SW , J
L0 to 2047 (default)
Varies according to the type of power
supply module.
0.25A
0.13kg
98mm (3.86in.)
27.4mm (1.08in.)
89.3mm (3.52in.)
MELSEC-Q
Remark
Q01CPU
The number of device
points is fixed.
\ W ,
\ SB
\ G
Set parameter values
to specify
0.27A
0.13kg
3 - 3